×

Sliding mode observer-based fault detection of distributed networked control systems with time delay. (English) Zbl 1242.93023

Summary: This paper considers the fault detection problem of Distributed Networked Control Systems (DNCSs) with time delay. A sliding mode observer-based fault detection method for a two-level DNCS is presented and two different situations are considered. When all the states of the system are available for measurement, we convert the fault detection problem to a sliding motion stable and reachable problem. When some states of system are not available for measurement, we design a transformation matrix to separate the measurable states and the unknown states, and then different sliding mode observers for those unknown states are developed to achieve fault detection. Finally, a numerical example is provided to illustrate the effectiveness of the proposed method with simulation results.

MSC:

93B07 Observability
93B12 Variable structure systems
94C12 Fault detection; testing in circuits and networks
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] B. Castillo-Toledo, J. Anzurez-Marin, Model-based fault diagnosis using sliding mode observers to Takagi–Sugeno fuzzy model, in Proceedings of the IEEE International Symposium on Intelligent Control, Cyprus (2005), pp. 652–657
[2] S.X. Ding, P. Zhang, Observer-based monitoring of distributed networked control systems, in IFAC Safeprocess, Beijing, China (2006), pp. 2354–2359
[3] S.X. Ding, P. Zhang, An observer based fault tolerant scheme for distributed networked control systems, in European Control Conference, Kos, Greece (2007), pp. 3687–3694
[4] C. Edwards, S.K. Spurgeon, R.J. Patton, Sliding mode observers for fault detection and isolation. Automatica 36(4), 541–553 (2000) · Zbl 0968.93502 · doi:10.1016/S0005-1098(99)00177-6
[5] H.J. Fang, H. Zhang, Y.W. Fang, Quasi T–S fuzzy models and stable controllers for networked control systems, in Proceedings of the 6th World Congress on Intelligent Control and Automation, Dalian, China (2006), pp. 220–231
[6] T. Floquet, C. Edwards, S.K. Spurgeon, On sliding mode observers for systems with unknown inputs. Int. J. Adapt. Control Signal Process. 21(8), 638–656 (2007) · Zbl 1128.93008 · doi:10.1002/acs.958
[7] H. Gao, T. Chen, New results on stability of discrete-time systems with time-varying state delay. IEEE Trans. Autom. Control 52(2), 328–334 (2007) · Zbl 1366.39011 · doi:10.1109/TAC.2006.890320
[8] Z. Gu, D.B. Wang, D. Yue, Fault detection for continuous-time networked control systems with non-ideal QoS. Int. J. Innov. Comput. Inf. Control 6(8), 3631–3640 (2010)
[9] Y. He, G.P. Liu, D. Rees, HN filtering of discrete-time systems with time-varying delay, in Signal Process (2009), pp. 89275–89282
[10] Z.H. Huo, Y. Zheng, C. Xu, A robust fault-tolerant control strategy for networked control systems. J. Netw. Comput. Appl. 34, 708–714 (2011) · Zbl 05891724 · doi:10.1016/j.jnca.2010.10.012
[11] B. Jiang, M. Staroswiecki, V. Cocquempot, Fault estimation in nonlinear uncertain systems using robust sliding-mode observers. IEE Proc. Part D. Control Theory Appl. 151(1), 29–37 (2004) · doi:10.1049/ip-cta:20040074
[12] C. Kambhampati, R.J. Patton, F.J. Uppal, Reconfiguration in networked control systems: Fault tolerant control and plug-and-play, in IFAC Safeprocess, Beijing, China (2006), pp. 151–156
[13] C.L. Ma, H.J. Fang, Research on mean square exponential stability of networked control systems with multi-step delay. Appl. Math. Model. 30(9), 941–950 (2006) · Zbl 1142.93419 · doi:10.1016/j.apm.2005.06.004
[14] L.A. Montestruque, P.J. Antsaklis, On the model-based control of networked systems. Automatica 39(10), 1837–1843 (2003) · Zbl 1027.93023 · doi:10.1016/S0005-1098(03)00186-9
[15] R.J. Patton, C. Kamhampati, S.X. Ding, A generic strategy for fault-tolerance in control systems distributed over a network. Eur. J. Control 13(2), 249–280 (2007) · Zbl 1293.93255 · doi:10.3166/ejc.13.280-296
[16] C.P. Tan, C. Edwards, Sliding mode observers for detection and reconstruction of sensor faults. Automatica 38(10), 1815–1821 (2002) · Zbl 1011.93505 · doi:10.1016/S0005-1098(02)00098-5
[17] C.P. Tan, C. Edwards, Sliding mode observers for robust detection and reconstruction of actuator and sensor faults. Int. J. Robust Nonlinear Control 13(5), 443–463 (2003) · Zbl 1036.93025 · doi:10.1002/rnc.723
[18] L.G. Wu, C.H. Wang, Q.S. Zeng, Observer-based sliding mode control for a class of uncertain nonlinear neutral delay systems. J. Franklin Inst. 345(3), 233–253 (2008) · Zbl 1167.93326 · doi:10.1016/j.jfranklin.2007.09.001
[19] X.G. Yan, C. Edwards, Nonlinear robust fault reconstruction and estimation using a sliding mode observer. Automatica 43(9), 1605–1614 (2007) · Zbl 1128.93389 · doi:10.1016/j.automatica.2007.02.008
[20] C.X. Yang, Z.H. Guan, J. Huang, Stochastic fault tolerant control of networked control systems. J. Franklin Inst. 346(10), 1006–1020 (2009) · Zbl 1185.93146 · doi:10.1016/j.jfranklin.2009.08.001
[21] P. Zhang, E.L. Ding, Advanced design scheme for fault tolerant distributed networked control systems, in Proceedings of the 17th World Congress, Korea (2008), pp. 13569–13574
[22] W. Zhang, S.M. Branicky, S.M. Philips, Stability of networked control systems. IEEE Control Syst. Mag. 21(1), 84–99 (2001) · doi:10.1109/37.898794
[23] D. Zhang, L. Yu, W.A. Zhang, Delay-dependent fault detection for switched linear systems with time-varying delays–The averaged well time approach. Signal Process. 91, 832–840 (2011) · Zbl 1217.94081 · doi:10.1016/j.sigpro.2010.08.016
[24] Y. Zheng, H.J. Fang, Y.W. Wang, Robust fault tolerant control of networked control system with time-varying delays. J. Huazhong Univ. Sci. Tech. (Nat. Sci. Ed.) 32(2), 35–37 (2004)
[25] D.H. Zhou, Y.D. Ji, Network-based fault detection for discrete-time state-delay systems: A new measurement model. Int. J. Adapt. Control Signal Process. 22, 510–528 (2008) · Zbl 1284.93147 · doi:10.1002/acs.1000
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.