×

Analysis of 3D cracks in anisotropic multi-material domain with weakly singular SGBEM. (English) Zbl 1195.74254

Summary: A weakly singular, symmetric Galerkin boundary element method (SGBEM) is established for analysis of cracks in a three-dimensional, linearly elastic domain consisting of subdomains which are made from different materials. The integral equations governing each subdomain are obtained by employing a pair of weakly singular, weak-form displacement and traction integral equations. A system of governing equations for the entire domain is subsequently obtained in a symmetric form by properly combining the integral equations for each subdomain along with the use of the continuity of displacements and tractions on the subdomain interface. The technique developed possesses several important features: (1) it is applicable for modeling cracks with arbitrary geometry and under general loading; (2) the governing integral equations contain only weakly singular kernels (of \(\mathcal O (1/r)\)) such that their validity requires only the continuity of the displacement boundary data; (3) the formulation is symmetric and gives rise to a system of linear equations with a symmetric coefficient matrix; and (4) the formulation allows the treatment of a multi-material domain where a material constituting each subdomain can be generally anisotropic. In the numerical implementation, standard \(C^o\) elements are employed everywhere except along the boundary of the crack surface where special crack-tip elements are utilized to model the asymptotic behavior in the vicinity of the crack front. The use of this crack-tip element allows, additionally, the mixed-mode stress intensity factors to be determined directly and accurately in terms of extra degrees of freedom introduced at nodes along the crack front. Several example problems are presented to demonstrate the accuracy and capability of the technique; numerical results indicate that highly accurate stress intensity factors can be obtained with use of relatively coarse meshes.

MSC:

74S15 Boundary element methods applied to problems in solid mechanics
74R10 Brittle fracture
74E10 Anisotropy in solid mechanics
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Cruse, T. A., Boundary element analysis in computational fracture mechanics (1988), Kluwer Academic Publishers: Kluwer Academic Publishers Dordrecht · Zbl 0648.73039
[2] Bonnet, M.; Maier, G.; Polizzotto, C., Symmetric Galerkin boundary element methods, Appl Mech Rev, 51, 669-703 (1998)
[3] Li, S.; Mear, M. E., Singularity-reduced integral equations for displacement discontinuities in three-dimensional linear elastic media, Int J Fracture, 93, 87-114 (1998)
[4] Rungamornrat J. A computational procedure for analysis of fractures in three-dimensional anisotropic media. PhD dissertation, The University of Texas at Austin, Texas; 2004.; Rungamornrat J. A computational procedure for analysis of fractures in three-dimensional anisotropic media. PhD dissertation, The University of Texas at Austin, Texas; 2004.
[5] Rungamornrat J, Mear ME. weakly singular, weak-form integral equations for cracks in three-dimensional anisotropic media. Reports No. 05-24, ICES, The University of Texas at Austin, Texas, 2005.; Rungamornrat J, Mear ME. weakly singular, weak-form integral equations for cracks in three-dimensional anisotropic media. Reports No. 05-24, ICES, The University of Texas at Austin, Texas, 2005.
[6] Frangi, A.; Novati, G.; Springhetti, R.; Rovizzi, M., 3D fracture analysis by the symmetric Galerkin BEM, Comput Mech, 28, 220-232 (2002) · Zbl 1010.74078
[7] Li, S.; Mear, M. E.; Xiao, L., Symmetric weak-form integral equation method for three-dimensional fracture analysis, J Comput Methods Appl Mech Eng, 151, 435-459 (1998) · Zbl 0906.73074
[8] Xu, G.; Ortiz, M., A variational boundary integral method for the analysis of 3-D cracks of arbitrary geometry modelled as continuous distributions of dislocation loops, Int J Numer Methods Eng, 36, 3675-3701 (1993) · Zbl 0796.73067
[9] Bonnet, M., Regularized direct and indirect symmetric variational BIE formulations for three-dimensional elasticity, Eng Anal Bound Elem, 15, 93-102 (1995)
[10] Gu, H.; Yew, C. H., Finite element solution of a boundary integral equation for mode I embedded three-dimensional fractures, Int J Numer Methods Eng, 26, 1525-1540 (1988) · Zbl 0636.73087
[11] Becache, E.; Nedelec, J. C.; Nishimura, N., Regularization in 3D for anisotropic elastodynamic crack and obstacle problems, J Elasticity, 31, 25-46 (1993) · Zbl 0773.73029
[12] Xu, G., A variational boundary integral method for the analysis of three-dimensional cracks of arbitrary geometry in anisotropic elastic solids, J Appl Mech, 67, 403-408 (2000) · Zbl 1110.74768
[13] Rungamornrat J, Mear ME. A weakly singular SGBEM for analysis of cracks in 3D anisotropic media. J Comput Methods Appl Mech Eng 2006, submitted for publication.; Rungamornrat J, Mear ME. A weakly singular SGBEM for analysis of cracks in 3D anisotropic media. J Comput Methods Appl Mech Eng 2006, submitted for publication. · Zbl 1194.74501
[14] Gray, L. J.; Paulino, G. H., Symmetric Galerkin boundary integral formulation for interface and multi-zone problems, Int J Numer Methods Eng, 40, 3085-3101 (1997) · Zbl 0905.73077
[15] Frangi, A.; Maier, G., The symmetric Galerkin BEM in linear and non-linear fracture mechanics of zonewise homogeneous solids, (Beskos, D.,, Recent advances in boundary element and their solid mechanics applications (2003), Springer: Springer Berlin), 167-204 · Zbl 1098.74056
[16] Frangi, A.; Novati, G., BEM-FEM coupling for 3D fracture mechanics applications, Comput Mech, 32, 415-422 (2003) · Zbl 1038.74664
[17] Rungamornrat J, Mear ME. Coupling of SGBEM and FEM for analysis of cracks in 3D anisotropic media, in preparation.; Rungamornrat J, Mear ME. Coupling of SGBEM and FEM for analysis of cracks in 3D anisotropic media, in preparation. · Zbl 1235.74339
[18] Bacon, D. J.; Barnett, D. M.; Scattergood, R. O., Anisotropic continuum theory of lattice defects, Prog Mater Sci, 23, 51-262 (1978)
[19] Gray, L. J.; Martha, L. F.; Ingraffea, A. R., Hypersingular integrals in boundary element fracture analysis, Int J Numer Methods Eng, 29, 1135-1158 (1990) · Zbl 0717.73081
[20] Martha, L. F.; Gray, L. J.; Ingraffea, A. R., Three-dimensional fracture simulation with a single-domain, direct boundary element formulation, Int J Numer Methods Eng, 35, 1907-1921 (1992) · Zbl 0775.73322
[21] Martin, P. A.; Rizzo, F. J., Hypersingular integrals: how smooth must the density be?, Int J Numer Methods Eng, 39, 687-704 (1996) · Zbl 0846.65070
[22] Xiao L. Symmetric weak-form integral equation method for three dimensional fracture analysis. PhD dissertation, The University of Texas at Austin, Texas; 1998.; Xiao L. Symmetric weak-form integral equation method for three dimensional fracture analysis. PhD dissertation, The University of Texas at Austin, Texas; 1998.
[23] Li, H. B.; Han, G. M., A new method for evaluating singular integral in stress analysis of solids by the direct boundary element method, Int J Numer Methods Eng, 21, 2071-2098 (1985) · Zbl 0576.65129
[24] Hayami, K.; Brebbia, C. A., Quadrature methods for singular and nearly singular integrals in 3-D boundary element method, (Brebbia, C. A., Boundary element X, vol. 1 (1988), Springer: Springer Berlin), 237-264
[25] Hayami K. A projection transformation method for nearly singular surface boundary element integrals. In: Brebbia CA, Orszag SA, editors, Lecture notes in engineering, vol. 73. Berlin: Springer; 1992.; Hayami K. A projection transformation method for nearly singular surface boundary element integrals. In: Brebbia CA, Orszag SA, editors, Lecture notes in engineering, vol. 73. Berlin: Springer; 1992.
[26] Hayami, K.; Matsumoto, H., A numerical quadrature for nearly singular boundary element integrals, Eng Anal Bound Elem, 13, 143-154 (1994)
[27] Barnett, D. M.; Asaro, R. J., The fracture mechanics of slit-like cracks in anisotropic elastic media, J Mech Phys Solids, 20, 353-366 (1972) · Zbl 0291.73058
[28] Hyer, M. W., Stress analysis of fiber-reinforced composite materials (1998), McGraw-Hill: McGraw-Hill Boston
[29] Kassir, M. K.; Sih, G. C., Three-dimensional crack problems: a new selection of crack solutions in three-dimensional elasticity, vol. 2 (1975), Noordhoff International Publishing: Noordhoff International Publishing Leyden · Zbl 0312.73112
[30] Fabrikant, V. I., Applications of potential theory in mechanics: a selection of new results (1989), Kluwer Academic Publishers: Kluwer Academic Publishers Dordrecht · Zbl 0744.73016
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.