×

Optimal stochastic fault detection filter. (English) Zbl 1036.93060

Any system under automatic control demands a high degree of system reliability. This requires a heat monitoring system capable of detecting any plant, actuator and sensor faults as they occur and identifying the faulty components. In this paper a fault detection and identification algorithm, called optimal stochastic fault detection filter, is determined. The objective of the filter is to detect a single fault, called the target fault, and block other faults, called the nuisance faults, in the presence of the process and sensor noises. The filter is derived by maximizing the transmission from the target fault to the projected output error while minimizing the transmission from the nuisance faults. Therefore, the residual is affected primarily by the target fault and minimally by the nuisance faults. The transmission from the process and sensor noises is also minimized so that the filter is robust with respect to these disturbances. It is shown that the filter recovers the geometric structure of the unknown input observer in the limit where the weighting on the nuisance fault transmission goes to infinity. The asymptotic behavior of the filter near the limit is determined by using a perturbation method. Filter designs can be obtained for both time-invariant and time-varying systems.

MSC:

93E11 Filtering in stochastic control theory
93B35 Sensitivity (robustness)
93B51 Design techniques (robust design, computer-aided design, etc.)
93B30 System identification
PDFBibTeX XMLCite
Full Text: DOI

References:

[1] Athans, M., The matrix minimum principle, Information and Control, 11, 5/6, 592-606 (1968) · Zbl 0176.07301
[2] Bell, D. J.; Jacobson, D. H., Singular optimal control problems (1975), Academic Press: Academic Press New York · Zbl 0338.49006
[3] Chen, C.-T., Linear system theory and design (1984), Holt, Rinehart, and Winston: Holt, Rinehart, and Winston New York
[4] Chen, R. H., 2000. Fault detection filters for robust analytical redundancy; Chen, R. H., 2000. Fault detection filters for robust analytical redundancy
[5] Chen, R. H., Mingori, D. L., & Speyer, J. L. (2001). Perturbation analysis for Ricatti equation. In Proceedings of the American control conference; Chen, R. H., Mingori, D. L., & Speyer, J. L. (2001). Perturbation analysis for Ricatti equation. In Proceedings of the American control conference
[6] Chen, R. H.; Speyer, J. L., A generalized least-squares fault detection filter, International Journal of Adaptive Control and Signal Processing—Special Issue: Fault Detection and Isolation, 14, 7, 747-757 (2000) · Zbl 0974.93066
[7] Chen, R. H.; Speyer, J. L., Robust multiple-fault detection filter, International Journal of Robust and Nonlinear Control—Special Issue: Fault Detection and Isolation, 12, 8, 675-696 (2002) · Zbl 1032.93017
[8] Chung, W. H.; Speyer, J. L., A game theoretic fault detection filter, IEEE Transactions on Automatic Control, AC-43, 2, 143-161 (1998) · Zbl 0907.93056
[9] Douglas, R. K., Chen, R. H., & Speyer, J. L. (1997). Model input reduction. In Proceedings of the American Control Conference; Douglas, R. K., Chen, R. H., & Speyer, J. L. (1997). Model input reduction. In Proceedings of the American Control Conference
[10] Frank, P. M., Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy—a survey and some new results, Automatica, 26, 3, 459-474 (1990) · Zbl 0713.93052
[11] Kwakernaak, H., Asymptotic root loci of multivariable linear optimal regulators, IEEE Transactions on Automatic Control, AC-21, 3, 378-382 (1976) · Zbl 0324.49033
[12] Kwakernaak, H.; Sivan, R., The maximally achievable accuracy of linear optimal regulators and linear optimal filters, IEEE Transactions on Automatic Control, AC-17, 1, 79-86 (1972) · Zbl 0259.93057
[13] Massoumnia, M. A., A geometric approach to the synthesis of failure detection filters, IEEE Transactions on Automatic Control, AC-31, 9, 839-846 (1986) · Zbl 0599.93017
[14] Massoumnia, M. A.; Verghese, G. C.; Willsky, A. S., Failure detection and identification, IEEE Transactions on Automatic Control, AC-34, 3, 316-321 (1989) · Zbl 0682.93061
[15] Moylan, P. J.; Moore, J. B., Generalizations of singular optimal control theory, Automatica, 7, 5, 591-598 (1971) · Zbl 0269.49017
[16] Nayfeh, A. H., Perturbation methods (1973), Wiley-Interscience: Wiley-Interscience New York · Zbl 0375.35005
[17] Patton, R. J.; Chen, J., Robust fault detection of jet engine sensor systems using eigenstructure assignment, AIAA Journal of Guidance, Control, and Dynamics, 15, 6, 1491-1497 (1992)
[18] Speyer, J. L. (1986). Linear-quadratic control problem. In C. T. Leondes (Ed.), Control and dynamic systems; Speyer, J. L. (1986). Linear-quadratic control problem. In C. T. Leondes (Ed.), Control and dynamic systems
[19] White, J. E.; Speyer, J. L., Detection filter design: Spectral theory and algorithms, IEEE Transactions on Automatic Control, AC-32, 7, 593-603 (1987) · Zbl 0625.93071
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.